Overall Rating:
5 / 5
5 / 5
5 of 5(100%)would recommend this product to a friend.
Share this Product:
Facebook Digg DelIcioUs Twitter MySpace
Review This Product
Overall Rating:
5 / 5
5 / 5
one of the best,
November 18, 2008
By francis
from ridgway PA
"one of the best pieces of equipment to use and work with,, it isnt to expensive an it is one of the better than any other make and models out their, and holds op to the tasks when you need it to"
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Tigmate review,
November 17, 2008
By pjkeeku
from Racine, WI
"This welder has been very easy to use. I have not done much tig welding before, I caught on quickly and have been making good welds since. Setup was easy, all you need to add is argon and you are ready to go. It is also one of the better stick welders I have used."
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Hobart TigMate,
November 17, 2008
By VideoWallBruce
from Boonton, New Jersey
"I bought this welder primarily for delicate aluminum work. Prior to using it, I had a few questions, so I called Hobart. They were helpful, but couldn't answer questions about the TIG Torch. Hobart gave me the number for the torch manufacturer, who told me what I needed to know. Welder setup was quick and painless, so I connected my Argon tank, and was off and running on some 1/8" aluminum. Power was good, steady, and easily controlled with the fingertip controller. The weld was excellent, and the machine ran cool and quiet. I've since worked on galvanized sheet, stainless, and even did a little arc welding on mild steel. All worked out well. This welder weighs a little more than you may expect, so make sure you put it on a good cart."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Good TIG Welding Machine,
August 20, 2008
By mm4tide
from Reserve Louisiana
"I have been a pipe welder for 34 years and recommend the Hobart TIGMATE AC/DC Stick and TIG Welding Package. The Fingertip Control works great for thin metal. It's a very portable machine and does the job of a machine that cost more at the welding supply."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
good,
January 25, 2008
By junes
from new york
"this welder is fanaminal i used this one about a week ago and is very easy to use. you can weld both steel and aluminum with this welder so that is a big plus and the duty cycle on this machine is alot better than its competitors."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace