Overall Rating:
4.8 / 5
4.8 / 5
12 of 12(100%)would recommend this product to a friend.
Share this Product:
Facebook Digg DelIcioUs Twitter MySpace
Review This Product
Overall Rating:
5 / 5
5 / 5
Hobart AirForce 400,
November 2, 2009
By scotch960
from Richardson, TX
"I had wanted a plasma cutter for a very long time but wouldn't come off the $. After getting frustrated with using an oxy/acetelyne torch, sawzall and several other cutting wheels, decided to take the leap about a year ago. I'd never used a plasma cutter but had seen them used - so was a bit nervous about the $ and ability of the machine.
It took minutes to take out of the box, hook up my air hose and start cutting. I was absolutely amazed and seriously ticked about not buying one years ago.
I've used it to cut thin sheet metal, 1/8" thick tubing, 3/16" bar and 1/4" aluminum plate. It cut through all of it like it was butter - very quick, clean, easier than a torch, less slag, much less fire risk, much more flexible.
Since I bought this machine, the only time I've used the oxy/acetylene torch is to heat/bend metal. Money extremely well spent and wish I'd bought this machine years ago."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Plasma Cutter Air Force 400,
March 15, 2009
By TSmi
from Flandreau, SD
"I just recieved this last week. Performs as advertised. I installed a plug and converted it to 230 volts. It cuts 1/2" steel very well. A buddy of mine has the Lincoln equivilant of this plasma cutter and this one performs every bit as well for much less money."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Plasma Cutter, Air Force 400,
August 13, 2008
By ngas
from Gary, IN
"Plasma cutter is portable and easy to use.
No complaints. Would recommend this item."
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Hobart 400 plasma Cutter,
April 27, 2008
By smith10
from Boston, Ma area
"I like that we could change voltage per location. Cuts every well, a tool that will be used. I have recommend it to friends. You will not be disapointed with this cutter."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Horbart Airforce 400 Plasma cutter--Model #500474,
April 14, 2008
By Rappin
from Perry Ga.
"This is my first experience using a plasma cutter. The cutter works as advertised. Easy to use straight from the box. The Plasma cutter is very useful for yard art and farming task . I also like the portability aspect of the cutter. I can carry it from job site to job site fairly easy. This plasma cutter has been a great investment and addition to my shop. For anyone doing light to medium work this is the cutter to have."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Plasma cutter,
April 14, 2008
By dually01
from Sutherland, Virginia
"I have always wanted to own a plasma cutter as i do a lot of metal fabrication and welding. This is the most useful tool i have bought thus far. It cuts from thin gauge metal to 1/2" stock with the same ease. It is a big machine in a small package. I hooked my air to it and went to cutting right away. Another good thing about it is the fact that i saved over $300 by buying it from Northern, None of the competition could touch this price."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
plug type,
March 3, 2008
By 3aePierce
from Alamo, CA
"only have tested it out once on 1/8th inch steel but it worked great. the 115 v plug that it came with is not the typical household 115 v outlet style... its another 115 v plug style for higher amperage. i made a pigtail adapter to run it to the standard household style outlet"
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
AirForce 400,
January 15, 2008
By Jimmyc
from MO
"Works great! Very easy to use."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
Plasma Cutter,
January 14, 2008
By Luckydog
from Kansas
"The Hobart 400 is my first plasma cutter so I have nothing to compare it to. Being a retired handyman I was surprised that it was as simple as taking it out of the box and starting to experiment with cutting. No assembly required whatsoever. While I have considerable to learn about using it, it is so easy to use that I will be creating opportunities to experiment. We definitely could have used this tool when I was growing up on the farm. Definitely a good tool for the serious handyman or professional."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Hobart Plasma Cutter,
July 9, 2007
By ricksfabrcation
from Springfield, Oregon
"As a custom aluminum fabricator I must be on the money with my cuts. Using the straight line and circle roller guides can make perfect detailed cuts each time. The Hobart plasma cutter is the only machine that allows me to cut aluminum other than a circlular or jig saw. Aluminum and stainless are very touchy materials to fabricate and weld; the Hobart plasma cutter has made my work more economical, quicker & more precise. I strongly recommended this piece of equipment to anyone needing a very exacting way to cut material.
Rick"
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
1-10 of 12
Next Page