Overall Rating:
4.6 / 5
4.6 / 5
92 of 93(99%)would recommend this product to a friend.
Share this Product:
Facebook Digg DelIcioUs Twitter MySpace
Review This Product
Overall Rating:
5 / 5
5 / 5
great for the hobbiest,
November 5, 2009
By dantheman85
from grand rivers, KY
"the dutycycle is not good, but it is small highly portable and COMES GAS READY, as long as your are not expecting continious use it is great."
What is your level of technical expertise? Beginner
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
Welder works great,
November 2, 2009
By restored
from Moses Lake, WA
"So far my only compaint is that I had to troubleshoot the control circuit right out of the box. I found a bad crimp on the neutral wire. I fixed that and the machine works fine. I also had to have the correct drive roller sent to me. Customer service was great to deal with. No questions asked. I've done a couple little projects so and the machine works great. I'm using a Stargon #9 gas which helps put down a very nice, clean bead."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
MIG 135,
November 2, 2009
By skimus
from Long Beach, NY
"Very good velder for the price, only had proble with vire feed when the velding tip gets clogged, once cleaned it vorks fine again, restored my 63 willys jeep with it so far."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
welder is fine - what about adapter?,
August 18, 2009
By muscrat
from Michigan
"The welder works fine but does take time for a novice to learn. The first time I have ordered an 8" wire spool, it was loose on the adapter and prevents a good weld. Anyone solved this?"
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
great welder,
July 23, 2009
By mrcash54
from southern indiana
"northern 135 mig welder is a great welder at a affordable price.recieved it on time,popped in the wire plugged it in,was ready to go .it did a great job and the price was right."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Very good welder,
July 21, 2009
By toodh
from MA
"This appears to be exactly the same welder marketed by Lincoln, except the Lincoln does not have the MIG gas attachment. I am very satisfied with the performance of the Northern unit."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
good small welder,
July 20, 2009
By ladywelder
from Rhode Island
"I wanted a smaller welder that is portable and can be used in a standard electric outlet. (I have a larger Miller welder but definitely for shop use only)
Easy to assemble; has the gas regulators included which is nice as I prefer to weld with shielding gas as opposed to flux wire; did the job on 3/8" steel.
Have recommended it to other lady welders."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Perfect for smaller fabrication projects,
July 20, 2009
By Widgetmaker52
from Bradenton, FL
"If you don't have a 220V service in your garage or workshop, then this is the welder for you. It's just right for numerous creative projects for your car, boat, bike, or original artwork. If you buy the right accessories you can even work with aluminum and stainless steel too. I didn't need a production welder, so why spend the extra money to have one sitting around? If you take on a larger project just do the fabrication at home and take your project to the local professional welding shop for final assembly. This procedure will save you a lot of money as it has for me."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
Great for the Shop,
July 20, 2009
By jetman
from Cincinnati,OH
"I purchased this welder for home projects and it works great, Only problem I had was the Gas hose from the regulator cracked and was leaking about a 2 months after I purchased the unit. I just cut the hose and re-connected. I have welded 1/4 in steel with this welder and it works great. for the money you cannot go wrong with this welder."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Good Welder,
July 13, 2009
By Anonymous
from Plano, Tx
"I am somewhat new to welding. I bought this welder because I was tired of borrowing a friends much larger Miller welder. I realized I could not afford the bigger welder and this one was on sale. I have found that it has met all of my needs. It was not exactly clear how to set up but I did get it set up. I felt like this was a very solid unit and was perfect for a first time welder.
More power would be nice from time to time. and I have noticed that the wire slips occasionally. But in the end I am very happy with this purchase.
I recommend this for light duty welding. This is a perfect residential garage welder. As the title suggest I bought this welder to fix a racing go-kart and every weld has held up."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
1-10 of 93
Next Page