Overall Rating:
4.6 / 5
4.6 / 5
11 of 12(92%)would recommend this product to a friend.
Share this Product:
Facebook Digg DelIcioUs Twitter MySpace
Review This Product
Overall Rating:
5 / 5
5 / 5
Loved it,
September 3, 2009
By kfchambone
from Long island
"I used this sand blaster to restore my chevrolet nova. Overall I'm very impressed with this blaster. The spray pattern is about the size of a quarter. Not that big but not to bad. I did my entire trunk, and interior in about 3 five hour days. I'm really o.c.d. with it though.. because it's so fun to watch the layers and layers of paint being blown off in seconds. Sandblasters are only as strong as the compressors. Being this sandblaster is siphon fed, rather then a pressure pot, it need's more pressure to keep it going. I used a titan 5hp gas compressor, (used for contractors with nailing roofing) it has twin 5 gallon tanks and shoots 15 cfm at 90 psi. Overall I love this gun. I used silica sand in it, till i read somewhere that you can die from exposure to it by a illness called silicosis. SO DON'T SAVE A DIME AND USE SAND."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
2 / 5
2 / 5
Could be better,
November 20, 2008
By Kelly555
from Poulsbo, WA
"I had borrowed a cheap Sear sand blasting unit but I also had one I bought at a garage sale that didn't have a gun. I thought I'd buy this one so I could return the one I borrowed. Had them both at the same time and switched back and forth testing the two. The other had porcelain head and this one is steel, not sure if that what made the difference but the other one really out-did this one. This one did work ok if it was the only way to go but since I had the other one I put this away and just used the other for the job. If I do more I'll probably try the more expensive units and see it they work better."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
Suction Blasting Gun Kit,
August 11, 2008
By drahthaar
from Naples, NY
"The product works as advertised. I am fully satisfied with it."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Works as advertised,
April 18, 2008
By LiquidSky
from Montrose, CO
"This was a replacement gun for an old sandblasting cabinet [original gun nozzle overly worn]. I liked that it had extra nozzles."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Have a Blast!,
April 16, 2008
By cooper8
from Lancaster, PA
"My wife wanted me to fix up an old lamp, a kind of wrought iron type of thing. I took it all apart to sand and paint, but could not get sand paper in the curls of iron especially where two pieces of metal met. This simple sand blaster did the trick. Just put the steel pipe into a bucket of sand (be sure to sift it first and get the stones out) connect the hoses (air hose and sand supply hose) and blast away. For small projects like the lamp just blast it out side. You don't need a cabinet and you can buy sand at the local hardware store.
Excellent product for occasional blasting!"
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
,
January 14, 2008
By Tony88
from Bay Shore NY
"After I cleared the machining debris out of the gun it worked fine. Drove me crazy for a couple of days why only air and not media was coming out of the tip. A small ball bearing like piece of metal was stuck in the media inlet where it mixes with the air. Once I found and fixed it it worked fine."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Great tool for the $$$,
January 9, 2008
By 2dogs2
from Pocono's Pennsylvania
"I have had one like this for at least 15 years, and have gone through many nozzles. This is well worth the money and outside of buying extra nozzles it will last for years. Does a great job at cleaning any rusted parts you can throw at it, will take cheap screened sand without complaining too."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Blasting gun,
October 30, 2007
By bt456
from Texas
"A great gun for portable use."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
works,
October 29, 2007
By sully
from Metro, il
"I used one on restoring a 1929 model a roadster pickup. As long as the sand is clean it works great. If you are going to reuse the sand make sure its clean or it will stop up every min. or so."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
TLG110657,
July 9, 2007
By TLG110657
from NORTH CANTON ,OHIO
"BEST SMALL UNIT I'VE USED IDEAL WITH THE BLACK BEAUTY SLAG MUCH FASTER THAN SILICA SAND"
What is your level of technical expertise? Home Handyman
1 of 1 people found this review helpful.
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
1-10 of 12
Next Page