Overall Rating:
4.8 / 5
4.8 / 5
5 of 5(100%)would recommend this product to a friend.
Share this Product:
Facebook Digg DelIcioUs Twitter MySpace
Review This Product
Overall Rating:
5 / 5
5 / 5
Pure Ingersoll !!!!,
July 13, 2009
By KcNh
from Warner, NH
"I've always wanted an air hammer/chisel, but never had a full time use for it. I aquired a 1956 Ford F-100 to make into a street-rod of sorts and found loose front spring hanger rivots---probably could have cut them with my torch but, didn't want to damage the hangers. ALAS !!! an excuse to get that air hammer, had the rivots cut, the holes reamed and the hangers back on in forty min. I may not use it again right away, but I know where it is !
This is a great tool at a great PRICE & works just as nicely as all my other Ingersoll/Rand tools do !!!"
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
great tool,
November 18, 2008
By 426greg
from N/W , PA
"Excellant product, have had the opportunity to use it on several
occasions so far, works very well, more power than others I
have used."
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Great tool with many uses,
November 18, 2008
By MEE2
from St. Paul, MN
"I bought this tool while working at home on my sons Dakota. We had issues removing the clutch fan and didn't want to buy the special clutch fan wrench due to high cost. We read a forum and someone mentioned they used and air chisel to loosen the clutch fan. We adjusted the built in regulator for the mildest hit and set out to hammer the nut near one of the edges. To our suprise after only a couple beats the fan was loose and we simply spun it off by hand. We replaced the water pump and tightened the clutch fan nut the same way we ha d got it loose. This tool paid for it self with out any question, it saved us twice what it cost since we didn't have to buy a special clutch fan wrench. Great tool, Awesom price.
We have since used it to remove ball joint rivits and it performed awesome. A tool you have got to own."
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
Air hammer,
August 11, 2008
By Reeg
from Rural Illinois
"So far, so good. I've used this as an air chisel several times and it performs as well as the more expensive tool company one that I wore out. The built in air regulator is very useful for controlling the amount "hammer" that I need.
If it lasts half as long as my last one I will be happy."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
dependable tools,
October 8, 2007
By chayo
from Artesia, New Mexico
"When I buy tools for work or for my self I go quality and dependablity. I do not want to more so quickly."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace