Overall Rating:
4.8 / 5
4.8 / 5
15 of 15(100%)would recommend this product to a friend.
Share this Product:
Facebook Digg DelIcioUs Twitter MySpace
Review This Product
FEATURED REVIEW
Overall Rating:
5 / 5
5 / 5
Bring out the bling!,
October 16, 2007
By Amalgamator
from Hagerstown MD
"Man, this buffer is great. The high RPM and good power will have your aluminum, brass, chrome or stainless shimmering in no time. But beware. If you've haven't previously used one of these high speed buffers, be very careful at first. This things can grab your goodies out of your hands, bounce it around the room and beat you with it. So use leather gloves, and goggles. Please, take your time till you get the hang of it. And it wouldn't hurt to have a good backstop!"
What is your level of technical expertise? Professional
3 of 3 people found this review helpful.
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
nice little tool,
November 17, 2009
By brianm
from Cornish, NH
"I took the buffing wheels off mine and put coarse and fine wire wheels on it for removing the rust that seems to be forever encroaching on my tools. I get lots of condensation on my tools here in NH from the huge temperature swings we get, which leaves tools looking like someone sprayed water on them, which then turns to rust. So, I got this buffer to use as a dedicated rust remover. I've had it about a year now, and I unfortunately have to use it often. It works just fine, even in a sub-zero garage. No issues. Plenty of torque. Very good price. Can't beat it."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Great Power - perfect for the home handyman,
November 2, 2009
By turkdc
from Detroit, Michigan
"I purchased this buffer to polish some aluminum motorcycle parts! This machine has the power necessary to really put some pressure on the part without slowing down the motor. The price is also affordable."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Buffer works well,
July 13, 2009
By buffaloglenn
from Texas
"This buffer works as advertised. It has sufficient power and speed to easily polish aluminum, steel and stainless. The unit is quiet and the buffing wheels that come with it are good. One improvement could be to include a 4 inch wheel on one end for those harder to polish pieces."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
From grungy to glowing!,
January 26, 2009
By JohnInStLouis
from Saint Louis, MO
"I have a weird hobby -- restoring old vacuum cleaners, especially old cast aluminum uprights. This buffer is The Perfect Tool for doing this, and I would imagine a lot of other jobs! The motor is powerful enough that you can lean into the work a bit when you need to, and for me the speed is just right. Yet it is quiet too!
Priced like this, don't waste your time rigging up your bench grinder to be a buffer -- just add this machine to your bench and make your life a lot easier. You've probably spent more on a tank of gas.
In less than an hour, I took a cast-aluminum housing from totally grungy to a mirror finish. No exaggeration! Like Richardo said above, this machine will have you thinking about going into the polishing business!"
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Benchtop buffer,
August 18, 2008
By Richardo
from Newtown, CT
"A truly remarkable tool. The speed is perfect for all polishing that I have done. The wheels are far enough away from the motor that there is plenty of room to polish fairly large items. This buffer sits on rubber feet and is heavy enough that it does not slide during use. I have been polishing copper pots and the shine is unbelievable. I might go onto the polishing business!"
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
It makes my world sparkle!,
August 11, 2008
By Bubba1114
from Massachusetts
"My Northern Industrial Benchtop Buffer has given a new glow to my passion - - the repair and resoration of antique clocks.
I was able to begin using right out of the box. No fuss or muss. I has the hp and torque to make even the dingiest metal gleam.
I would highly recommend it."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Benchtop Buffer,
August 11, 2008
By Jumbo
from Emporium, PA
"Did everything, was everything that I had expected. More than enough power, RPM doesn't change while under required load."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Northern Industrial Benchtop Buffer,
August 11, 2008
By Artist2
from Chicago area, IL
"This buffer has lots of power. It is recommended for people who had previous experience with buffers. With variable speed , and spindle change this buffer will be even better."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Just what I needed.,
August 11, 2008
By Peroma
from MA
"I have a 40 year old classic car with stainless steel mouldings. This unit, with the right compounds brings the the parts back to a new appearance. Great price for this useful tool."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
1-10 of 15
Next Page