Overall Rating:
4.4 / 5
4.4 / 5
11 of 11(100%)would recommend this product to a friend.
Share this Product:
Facebook Digg DelIcioUs Twitter MySpace
Review This Product
Overall Rating:
4 / 5
4 / 5
great little hole punch,
October 19, 2009
By pkb7
from Williamsburg, Ma
(read all my reviews)(read all my reviews)
"This is a great little hole punch. We use it in a classroom setting doing tinsmithing and light metal work. This punch works well on lighter gauged sheet metal aiding in the riviting process. It is a bit small which is an advantage for smaller hands but limits is use. I would also love to get a similiar punch in a larger size."
What is your level of technical expertise? Professional
Was this review helpful to you?YesYesNoNo(Report Inappropriate Review)(Report Inappropriate Review)
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
Good 'nuff,
July 22, 2009
By Hojpoj
from Newport News, VA
(read all my reviews)(read all my reviews)
"I'm using it for putting 1/8" and 3/16" holes in aluminum to run bolts through. It does the job fine for what it's intended, clean holes and little surrounding distortion. I know I'm using on stuff thicker than what is intended, but still managing.
Only improvements I'd make on it is a slightly deeper throat and either longer handles or a ratcheting handle arrangement."
What is your level of technical expertise? Home Handyman
Was this review helpful to you?YesYesNoNo(Report Inappropriate Review)(Report Inappropriate Review)
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
Hole Punch,
August 11, 2008
By Dkcflyer
from Chicago, IL
(read all my reviews)(read all my reviews)
"This is the 2nd one that I have bought. The 1st is in my store repair shop. It is a little hard to squeeze at first, but makes clean holes in thin metals. Much better and more accurate than trying to drill. I also used it to make my metal piece concave by using a small punch and a large hole receptacle. Worked okay."
What is your level of technical expertise? Professional
Was this review helpful to you?YesYesNoNo(Report Inappropriate Review)(Report Inappropriate Review)
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Great Punch,
April 14, 2008
By SignGuy
from Virginia
(read all my reviews)(read all my reviews)
"I use this punch daily.
I use it mainly to punch holes in .040 aluminum signs for which it works perfectly. Paid for itself the first day."
What is your level of technical expertise? Professional
Was this review helpful to you?YesYesNoNo(Report Inappropriate Review)(Report Inappropriate Review)
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
excellent tool!,
March 21, 2008
By jewelgirl
from Illinois
(read all my reviews)(read all my reviews)
"I love this tool! The punches are perfect every time, and it is easy to use. I'm going to get another as a back up, in case I lose or somehow break the one I have (yes I know it is steel), that is how much I love this tool!"
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Was this review helpful to you?YesYesNoNo(Report Inappropriate Review)(Report Inappropriate Review)
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Excellent Hole Puncher,
January 14, 2008
By supersignz
from Mahwah, NJ
(read all my reviews)(read all my reviews)
"I cannot believe I have been in business for almost twelve years and did not have a hole puncher. Normally, I would take my drill, determine what size bit I needed, then just drill the required holes into the substrate. Many times I then had to remove the excess material from around the hole. If I didn't do this, the job would not look professional. I learned about Northern Tool and, specifically, it's Hole Punch. For a minimum investment I received an excellent product with seven (7) dies for various sized holes, as well as a very nice carrying case for the product. I am embarrassed that it took so long for me to wake up! I am more than satisfied with this purchase and would strongly recommend it and Norther Tool to others."
What is your level of technical expertise? Professional
Was this review helpful to you?YesYesNoNo(Report Inappropriate Review)(Report Inappropriate Review)
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
Hole Puncher,
January 14, 2008
By tintapper
from Tilllsonburg, ON
(read all my reviews)(read all my reviews)
"Excellent, excellent product. Although it may not work as well as a Roper Whitney product it still works very well. Makes holes effortlessly just over 1/4" diameter. Great buy"
What is your level of technical expertise? Professional
Was this review helpful to you?YesYesNoNo(Report Inappropriate Review)(Report Inappropriate Review)
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
Indespensible,
October 30, 2007
By tukster
from Tennessee
(read all my reviews)(read all my reviews)
"This tool has paid for itself many times over. I'm in charge of the pinewood derby for our 4 county district and I've been modifying over 100 trophies every year with sheet metal straps. The first year I spent hours building a jig to drill the pieces and more hours drilling and deburring the straps with mediocre results. The next 2 years this punch took care of all the holes in no time. I've also used it for punching holes in leather, tarps, and several different heavy fabrics with excellent results. You really can't afford not to have one of these in your workshop."
What is your level of technical expertise? Home Handyman
Was this review helpful to you?YesYesNoNo(Report Inappropriate Review)(Report Inappropriate Review)
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
Great tool, best price,
October 29, 2007
By JSimpson
from Seattle, WA
(read all my reviews)(read all my reviews)
"I had a little difficulty with the instructions the first time, probably due to my lack of experience with punches. It appears to be well constructed; all the parts moved easily and I punched several different types of metal including a multi-layered segment without any slipping or difficulty. Very good price (best I could find) and delivered quickly."
What is your level of technical expertise? Home Handyman
Was this review helpful to you?YesYesNoNo(Report Inappropriate Review)(Report Inappropriate Review)
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
Best deal for the money.,
July 10, 2007
By Timbobtrw
from MA
(read all my reviews)(read all my reviews)
"This is an excellent punch for the price!! It has seven different sizes and an adjustable depth gauge. The reason i only gave it four stars is because it is rated for up to 14 gauge sheet metal, but i had a lot of trouble punching a piece of 16 gauge galvanized steel with it. I'm sure it is strong enough to handle 14 gauge but you just can't get enough leverage with it's handle."
What is your level of technical expertise? Professional
Was this review helpful to you?YesYesNoNo(Report Inappropriate Review)(Report Inappropriate Review)
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
1-10 of 11
Next Page