Overall Rating:
3.5 / 5
3.5 / 5
4 of 6(67%)would recommend this product to a friend.
Share this Product:
Facebook Digg DelIcioUs Twitter MySpace
Review This Product
Overall Rating:
2 / 5
2 / 5
Low grade brake.,
March 23, 2009
By bigdadshaw
from western, Ma
"The drum is good but the vibration from our cart loosened both set screws in 1/2 hour so i welded it in place. Then the spot welds on the band broke. If you have to buy this. I Suggest you beef it up."
What is your level of technical expertise? Home Handyman
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
go kart brake,
November 17, 2008
By bigmikke
from nia falls ny
"does the job great 5 hp and under over that get a real brake with a disk and pads"
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
rubber brake?,
April 14, 2008
By nobody0857
from Florida
"I was surprised to see a rubber compound bonded to the brake band. I'm used to seeing something like an automobile lining. The brake worked fine so I guess this is the new non asbestos enviromentally way to stop."
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
5 / 5
5 / 5
good brakes,
October 15, 2007
By FMATim
from Hilton Head is ,SC
"This brake drum and band kit is everything needed to replace existing brakes,or install on a new cart.In my experince this kit fit properly and my daughter is safe and happy!"
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
1 / 5
1 / 5
rubber lining,
July 31, 2007
By mikey67
from ladd IL
"the brake drum I got was great, BUT the brake band had a rubber lining not a normal brake lining, I thought that, OK I will try this, but douted its abilty, the go cart it is on has a 12 hp moter & a light weight frame, the brakes made a bad squeling noise, you couldn't push it backwards , the brake would grab ,stoped great frist few times, rubber got hot, melted & went metal to metal fast & lost brakes. it is also made for a cable & can be easly convereted to a rod to apply brakes, took band off cleaned rubber off & rivited an old part of a leather belt & glued the rest to the band now it works great & relible"
What is your level of technical expertise? Professional
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace
Overall Rating:
4 / 5
4 / 5
Great stopping,
November 16, 2006
By Ngawiecki
from New York, NY
"This complete kit was easy quick to instally if the bolt for the pin wasn't broken. Mine was but i found a thicker bolt and put it through the brake band without the pin. It worked perfectly fine. Stopping is better then stock brakes. I have a 10 hp go kart so stopping needs to be strong so that it is possible to do a 90 degree turn going into it at 55 mph. If you need a replacement for your brake this is the perfect one for any go kart."
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Facebook Digg DelIcioUs Twitter MySpace