Set of 3 roller dollies carries up to 1500 pounds! Rust-resistant plates measure (1) 7.2in. x 8in. and (2) 8in. x 8in. 4 swivel casters on each dolly have 3in. wheels. 3 roller units make a stored snowmobile easy to move Keeps snowmobile off garage floor, helps prevent rust
Average Customer Rating:
4.1 out of 5
Rating Summary
(19 reviews)
5 stars
10
4 stars
5
3 stars
2
2 stars
0
1 star
2
17 of 19 (89%) customers would recommend this product to a friend.
Customer Reviews for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
5
/ 5
Great Dolly,
August 11, 2008
By mondi12from NY
"Works great with my snow plow and are very handy to have for moving heavy things. They are very sturdy."
What is your level of technical expertise?:
Home Handyman
Review 2 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
4
/ 5
great,
April 14, 2008
By tech2000from utah
"These worked better than I expected and are very strong. I would agree that some straps to hold on to the ski's would be nice but over all I am very happy."
What is your level of technical expertise?:
Home Handyman
Review 3 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
5
/ 5
Snowmobile Dollies,
April 14, 2008
By kriegs45from Webster City, IA
"I would have to say these dollies are the best! If i had more than one sled i would have bought more! I would recommend these to any of my friends expect 1 & he's never happy with anything!! If your thinking about buying a set buy these there worth every penny!! As u have read in other reviews iam sure, u do need to strap them down with a tie down! Not that big of a deal though!!!"
What is your level of technical expertise?:
Home Handyman
Review 4 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
3
/ 5
Good Quality, tough to tighten wheels,
April 14, 2008
By knucklesandwichfrom Twig, MN
"The quality of the dollies are very good. Nice big wheels make it easy to maneuver even on a dirty garage floor. However, it is difficult to tighten the wheels to the frame. You can get a wrench on the nut, but there's no place to get a wrench on the wheel side. You can't tighten them down without putting a channellock or similar wrench on the other side. Also, you'll get plenty greasy when putting the wheels on."
What is your level of technical expertise?:
Home Handyman
Review 5 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
4
/ 5
Nice dollies for the price,
January 21, 2008
By GMNDfrom Bis, ND
"These dollies work well on smooth floors. I think they could be improved by adding some grip strips on them to keep the skis from sliding off them."
What is your level of technical expertise?:
Professional
Review 6 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
5
/ 5
Love it!,
January 14, 2008
By dreamerfrom PA
"My wife purchased 2 of these for me and I think they are great we have 3 snowmobiles and they don't take up much space and they are easy to use. I would defiantely recommend them to anybody who has snowmobiles that need to move."
What is your level of technical expertise?:
Professional
Review 7 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
5
/ 5
*SNOWMOBLIE DOLLY SET USED FOR SNOWPLOWS AND MORE*,
November 2, 2007
By Anonymous Reviewerfrom FULTON (Southern, JEEP, Border Town, of) WISCONSIN
"I purchased several of these Snowmobile, (3-Piece), Dolly Sets, awhile back. And was impressed with their Heavy-Duty-Construction, 1500-Pound-Capacity and 4, (3-Inch-Swivel-Caster), Wheels. They work Great for moving my 2 SnowPlows around on my cement floor garage and also, help with remounting the SnowPlows back on the SnowPlow Trucks. Have just recently purchased several more of these Snowmobile, (3-Piece), Dolly Sets and used 4 of them to move the, Antique Player Piano, around in our home. They've come in handy for moving other items as well. You can't go wrong, purchasing these Snowmobile, (3-Piece), Dolly Sets, for the Great Price, that Northern Tool + Equipment, offers them for. And when they put them on sale, it's even Better. "Thanks""
What is your level of technical expertise?:
Professional
Review 8 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
4
/ 5
November 1, 2007
By kingjmfrom central new yotk
"This is a very good product however it really needs a way for it to stay in place when you are pushing the snowmobile around. What i foudn that works good is to take a tie down strap and wrap it around the skies and strapped it down really tight and they stay in place."
What is your level of technical expertise?:
Home Handyman
Review 9 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
4
/ 5
Snowmobile Dolly,
October 15, 2007
By SnowmobileTimfrom Spring Creek, NV
"Great product and very heavy duty. Could use a strap to keep skis from sliding off. The big wheels help them roll very easy over rough terrain."
What is your level of technical expertise?:
Home Handyman
Review 10 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
5
/ 5
Snow Plow Dolly,
October 8, 2007
By Jimmerfrom upper Michigan
"Okay, they aren't for a snow plow, but that's what I got them for and they work really well. The plow weighs about 600 lb and I store it on the dollies on a smooth cement floor. I have had no problems moving it around."
What is your level of technical expertise?:
Home Handyman
1 of 1 people found this review helpful.
Review 11 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
5
/ 5
Snowmobile Dolly's... plus!,
October 8, 2007
By Jaydeefrom Southeast Michigan
"I have owned snowmobiles for many years and noticed these dolly's in an email ad from Northern Tool. Moving snowmobiles around, especially if in garage or storage area is always a task. These dollys no doubt make the task very simple and efficient! Just one thing though, I have been disabled for several years and can no longer ride. I was in the market for a simple dolly for other uses. I looked at dimensions, saw the 3" swivel casters and the fact you get three for one low price...l I knew it was just what I needed. I use one for the back side of my rolling generator, with my condition it makes life easy. The other two I use to haul various items, like a folding ramp I use often to load heavy items into truck. The uses are endless these compact yet sturdy dolly's are good for and they roll over uneven surfaces smoothly. Thank you Northern Tool!"
What is your level of technical expertise?:
Home Handyman
Review 12 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
5
/ 5
Snowmobile Dolly,
July 10, 2007
By MikeTfrom White Salmon, Wa
"These are heavy duty, easy rolling, dollys. My first set worked so well that I bought a set for my wifes snowmobile."
What is your level of technical expertise?:
Home Handyman
Review 13 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
5
/ 5
snowmobile dolly,
July 9, 2007
By rdshoefrom McComb , OH
"These are the nicest dolly I found and the price was very reasonable, they work fine and will probably get some more in the future"
What is your level of technical expertise?:
Professional
Review 14 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
3
/ 5
Good But.....,
July 9, 2007
By SSCIGARfrom CO
"I like them well enough but it would be nice if they had side rails or a no slip rubber mats on them so that the skis on the sleds don't slide off when rolled over a crack in the cement."
What is your level of technical expertise?:
Home Handyman
Review 15 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
1
/ 5
Breaks Easily,
May 1, 2007
By Quinnfrom Sarnia, Ontario
"I used these dollies to move my 95 Grand Touring. So they didn't slip off the dollies, I used tie downs to hold them in place. Second time I moved the machine, two of the wheels snapped right off one of the dollies as it was moving across a smooth cement floor. I bought the 1500lbs model thinking they would be stronger."
What is your level of technical expertise?:
Home Handyman
Review 16 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
4
/ 5
snow mobile dolly,
March 7, 2007
By pankyfrom Nashua , NH
"The front dolly's need to have some pull tight straps that would go over the ski on the front and back of the ski spindle. This would prevent the skis from trying to kick out if the floor of driveway is not perfectly flat. The product would be absolutely great if it had that so you would not have to keep putting them back after they fly out. The wheels certainly do make moving the machine easy."
What is your level of technical expertise?:
Professional
Review 17 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
1
/ 5
Keep looking...,
February 8, 2007
By DavidD2from Colorado
"Not sure what product the last two people were writing about. First off, my sleds weigh 510lb WET and I have bent all three sets of Dollies. Second you can't keep the sled on these dollies unless you somehow strap them down so plan to rig some sort of straps to hold them in place."
What is your level of technical expertise?:
Professional
Review 18 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
5
/ 5
December 23, 2006
By snowmanfrom snowpark ny
"heavy duty, last one you need"
What is your level of technical expertise?:
Professional
Review 19 for Northern Industrial Snowmobile Dolly — 1,500-Lb. Capacity
Overall Rating:
5
/ 5
dollies for snowmobile,
December 4, 2006
By tjk1from SE WI
"Great product. Well made, heavy gauge steel. Nice casters w/ball bearings. Simple assembly."
What is your level of technical expertise?:
Home Handyman
