Industry-standard contractor-grade pump has an explosion-proof motor with permanent magnet. Steel suction pipe telescopes from 22in. to 40in. UL listed. U.S.A. HP: 1/4, Watts: N/A, Amps: 20, Speed (RPM): 2600, Flow (GPM): 15, Max. Total Head (ft.): N/A, Max. Suction Lift (ft.): 7, Inlet Port (in.): 1, Outlet Port (in.): 3/4, Duty Cycle: 30 Min., Self-Priming: Yes, Bypass Valve: Yes, Seal Type: Mechanical, Nozzle Type: Manual, Hose (in. x ft.): 3/4 x 12, Dimensions L x W x H (in.): 12 x 9 x 9 Heavy-duty switch Thermal overload protection and junction box Heavy-duty battery cable Iron rotor Built-in strainer Hose with static ground wire Manual nozzle with nozzle boot that protects against dirt and contamination 2in. threaded base for tank openings Corrosion-proof adjustable section pipe Machined carbon vanes Pump may be padlocked No foot valve required Rain proof Includes manual nozzle
Average Customer Rating:
4 out of 5
Rating Summary
(5 reviews)
5 stars
1
4 stars
3
3 stars
1
2 stars
0
1 star
0
5 of 5 (100%) customers would recommend this product to a friend.
Customer Reviews for Tuthill Fuel Transfer Pump — 12 Volt, 15 GPM, Model# FR1210CNT
Overall Rating:
3
/ 5
Tuthill Transfer Pump #FR1210CNT,
July 9, 2007
By Mikey55from All most West Virginia
"The pump worked fine once I connected it directly to the battery. At first, I wired it to a trailer plug on the back of of my truck. The pump motor would not rotate at all. The voltage at the pump was 11.88 VDC. I started the truck, hoping to increase the valtage but it still would not rotate. I thought the pump was bad, so I removed it from the transfer tank. On a whim, I laid it next to the battery and connected it dirctly to the battery. The voltage was 12.11 VDC. When I turned it on, the pump motor rotated. I returned the pump to the tank and instaaled 2 Conductor #14 ESSO cable and the pump worked fine. I had no idea that .3 tenths of a volt would make that much difference."
What is your level of technical expertise?:
Home Handyman
Review 2 for Tuthill Fuel Transfer Pump — 12 Volt, 15 GPM, Model# FR1210CNT
Overall Rating:
4
/ 5
Almost there.,
July 9, 2007
By LuckyDLfrom Silver Spring, Md.
"Great little pump with alot of PUMP!!!!. I stand next to my fuel tanks and cry everytime I see the dollars flying out of the spout!!!! ...........................Seriously, this really is a great pump, easy to install and easy to use. Just received my second one last week for my deisel."
What is your level of technical expertise?:
Professional
Review 3 for Tuthill Fuel Transfer Pump — 12 Volt, 15 GPM, Model# FR1210CNT
Overall Rating:
4
/ 5
read the fine print,
May 19, 2007
By solarpowerfrom bahamas
"I recently purchased this pump for solar powered well water pumping. It works great in this application, pumped up thirty foot head to a reservoir tank. Only problem I had was not reading all the fine print on the pump. Be sure not to run the pump for longer than thirty minutes at a time. I am on my first rebuild kit. The pump will definitely overheat and die on you if you run longer than the thirty minutes recommended by the manufacturer."
What is your level of technical expertise?:
Professional
Review 4 for Tuthill Fuel Transfer Pump — 12 Volt, 15 GPM, Model# FR1210CNT
Overall Rating:
4
/ 5
March 9, 2007
By bp8688from winder, ga
"I am impressed with how quickly the pump is my only complaint is the pin for the switch has come out"
What is your level of technical expertise?:
Professional
Review 5 for Tuthill Fuel Transfer Pump — 12 Volt, 15 GPM, Model# FR1210CNT
Overall Rating:
5
/ 5
Fuel Transfer Pump,
March 7, 2007
By PaulRamfrom Anaheim,CA
"This is the best pump on the market. I live in california, but own several farms in Mexico and Central America. The pump is versatile and efficient. This is my fourth pump that I have purchased and the first from Northern Tool. I have been very satisfied and recommend this low maintenance pump."
What is your level of technical expertise?:
Professional
