Poor Quality,
November 17, 2008
"The upper taper was welded too narrow and the lower plate was welded too high. Either would have prevented the plate from working. It would be cheaper and faster to make your own plate that fits. Don't waste your money on this sloppy workmanship. On top of the poor manufacturing quality, it is pretty flimsy, so keep that in mind as well."
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Universal Weld-On Mount, Model# 500395,
September 19, 2008
"I got a bad quality part. The top of the mount where the Skidsteer slips under was welded .250 low on one side. It prevented the bottom of the mount to get close enough for the one pin to go down. I had to cut off the top lip of steel and reweld it in the correct position. It works now. With the amount of time spent to correct it, I could have made one myself."
What is your level of technical expertise? Professional
universal weld on adapter,
January 14, 2008
By cosmo from Sherman, TX
"I have purchased two of these and they have worked perfectly. I used one to make a pallet fork attachment for my tractors which have quick attach loaders, and I used the other one to convert a John Deere bucket to quick attach for universal use. This is the best solution for making attachments work between different types of equipment."
What is your level of technical expertise? Home Handyman
