Overall Rating:
3.7 / 5
3.7 / 5
6 of 7(86%)would recommend this product to a friend.
Review This Product
Overall Rating:
4 / 5
4 / 5
Good product,
July 20, 2009
By Kenkah1980
from South Brunswick, nj
"I had this salt spreader for a couple of years. Its a good salt spreader for small lots. One down side is you really have to use bagged salt. if you bulk salt products the spreader will clog up quickly."
What is your level of technical expertise? Professional
Overall Rating:
4 / 5
4 / 5
this is ok,
July 2, 2008
By Anonymous
from VT
"this is a preaty good product for the price and it holds what i need and it is great for snow i have some fun using this"
What is your level of technical expertise? Professional
Overall Rating:
4 / 5
4 / 5
salt spreader,
January 21, 2008
By str8
from pittsburgh, pa
"I really like the the salt spreader. It was fairly easy to hookup. It also fit my 2003 Chevy 1 ton dump truck. It actually hung on the tailgate. So it will fit a pick up or a dump truck. Let it snow."
What is your level of technical expertise? Professional
Overall Rating:
3 / 5
3 / 5
Affordable, well built.,
January 16, 2008
By ats01
from Iron Mountain, MI
"Works well for the price, well built. I would rate the mounting system as poor. Motor jams often and needs to be manualy rotated before starting. I do like the in-cab controls with built in diagnostics."
What is your level of technical expertise? Professional
Overall Rating:
4 / 5
4 / 5
MontanaPierce,
January 14, 2008
By MontanaPierce
from Montana
"This was a great buy and works very well. Although it spreads on a slightly slower scale, We reversed the positive and negative wires and expierenced a much faster way to empty the hopper."
What is your level of technical expertise? Professional
Overall Rating:
5 / 5
5 / 5
spreaders,
October 15, 2007
By PJar
from Kansas
"We ordered a tailgate spreader for our parking lots, it was easy to install and remove. This unit will be better than the old bed mounted one we used before."
What is your level of technical expertise? Professional
Overall Rating:
2 / 5
2 / 5
Spreader,
February 27, 2007
By RMLAWN
from HATBORO PA
"I bought this spreader about 2 years ago. The 2nd time out I backed into a snow bank it pushed the bottom part of the frame down about 1/4 inch this was enough to seperate the shaft from the motor. Stopped working. I was able to move it back but any little preasure put on it and it falls down again. THE BOTTOM LINE THIS UNIT NEEDS TO HAVE BETTER SUPPORT ON THE BOTTOM PART OF THE FRAME."
What is your level of technical expertise? Professional
0 of 1 people found this review helpful.