This air-powered nailer from Northern Industrial™ will help you zip through framing work. Drives nails at choice of three different angles. Rubber grip is comfortable for extended use. Air Consumption (CFM): 4.1, Operating PSI: 90, Fasteners Used: Framing Nails, Fastener Sizes (in.): 2 3/16 - 3 9/16, Coil or Strip: Strip, Inlet Size (in.): 1/4, Min. Hose Size (in.): 3/8, Case Included: Yes, Tool Weight (lbs.): 17 13/32 Drives nails at 21°, 28° or 34° angles Contact trip fire Rubber nose cushion avoids marring Aluminum body Rubber grip CE certified
Average Customer Rating:
4.6 out of 5
Rating Summary
(84 reviews)
5 stars
59
4 stars
22
3 stars
2
2 stars
0
1 star
1
83 of 84 (99%) customers would recommend this product to a friend.
Customer Reviews for Northern Industrial 3-in-1 Framing Nailer
FEATURED REVIEW
Overall Rating:
5
/ 5
3 in 1 framing nailer,
October 9, 2007
By Lumbermanfrom Webster SD
"The main reason I purchased the nailer is that I have arthritis in my hands and its hard for me to keep pounding with a hammer. With the nailer I can go a lot longer and get done a lot faster. The other reasons are the light weight and that I am able to shoot three sizes of nails. It not only shoots 16d, it also shoots 8d. I can use it for building shleves, sheeting and remodeling projects. I also work in a lumber yard where I build feed bunks, this will allow me to build them in a lot shorter time. The price of the nailer was great and the price of the nails was also right. I am very satisfied with my nailer after using it to complete our new garage at the lake."
What is your level of technical expertise?:
Home Handyman
3 of 3 people found this review helpful.
Review 2 for Northern Industrial 3-in-1 Framing Nailer
FEATURED REVIEW
Overall Rating:
5
/ 5
Quick, Easy, Dependable,
July 9, 2007
By TheBearfrom Gulfport, Ms.
"Since I purchased the Northern Industrial 3-in-1 Framing Nailer, I've used it several times. Each time made me realize that I should have bought one years earlier. It makes you "look forward" to do the jobs that you would normally dread. It truly makes the job quicker and easier, especially when you are 25 feet off the ground, on a ladder, holding a 2x 6 in the other hand. The qualiy of this tool is as I would hope it would be, very good. It's not only compatable with the higher cost brands that you see in the building supply stores, but exceeds some of them in shooting 3 different angle of nails. You better get one!"
What is your level of technical expertise?:
Home Handyman
2 of 2 people found this review helpful.
Review 3 for Northern Industrial 3-in-1 Framing Nailer
FEATURED REVIEW
EXPERT REVIEW
Overall Rating:
5
/ 5
Excellent product,
November 23, 2006
By tooltimefrom Moyie Springs, Northern Idaho
"Let me say first that I've never used a nailer before, but sure have driven alot of nails in my time. I'm in the process of building my retirement/dream home in N. Idaho and decided to buy one and see what all the "hub-bub" was about. What a great way to frame nail! Light, easy to use, accurate, and best of all quick and effortless! And the price? much better than all the name brands! I can't imagine how I ever got along without it. And if it ever wears out I would buy another one immediately."
What is your level of technical expertise?:
Professional
7 of 8 people found this review helpful.
Review 4 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
5
/ 5
Great Gun,
April 27, 2008
By trentfrom Connecticut
"Cant beat it for the price. Used nailers of all levels and this compares with expencive top of the line guns. Perfect for around the house work and bigger framing jobs. easy to find nails that fit it."
What is your level of technical expertise?:
Professional
1 of 1 people found this review helpful.
Review 5 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
5
/ 5
Excellent!,
April 25, 2008
By bmizzyfrom Dallas, GA
"This is the first nailer I have purchased, though I have used many on various projects over the years. I could not be happier with the quality! I did purchase the wrong style of nail (33 vs 34 degree), but didn't realize it until I had already put through about 150 nails without issue. This thing just works.
I'm satisfied enough that I will consider Northern brand for all future tool purchases."
What is your level of technical expertise?:
Home Handyman
Review 6 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
5
/ 5
ECXELLENT!,
April 22, 2008
By williamgfrom Rocky Mountains, Colorado
"I purchased this nailer to have as a back-up during construction of our house. It has become the primary! It is lightweight, very powerful, maybe 2 missed shots out of 1000. nails are very easy to find, Very happy with NT and service. I am just happy!"
What is your level of technical expertise?:
Professional
Review 7 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
5
/ 5
Nice gun,
April 21, 2008
By redwolffrom Bartlett, TN
"does a fine job....added a room onto my house using it"
What is your level of technical expertise?:
Home Handyman
Review 8 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
4
/ 5
Very Pleased in North Carolina,
April 21, 2008
By Tkrispyfrom Morganton, North Carolina
"Before finding the 3-in-1 framing nailer from Northern, I had searched for a good framing nailer from some of the other big name companies but couldn't quite afford the costs of those other brands. The 3-in-1 by Northern was a very affordable nailer with the quality comparable to those other brands. I have only used my nailer a few times, but get the same results as from the other nailers. And, I can find nails for it at my local home improvement store without having to use a particular brand. I would recommend this nailer to any do-it-yourselfer who is on a tight budget. With the cost of materials going up everyday, to get a good affordable tool is a must. Thanks Northern!!"
What is your level of technical expertise?:
Home Handyman
Review 9 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
5
/ 5
Great Nailer at a Great Price,
April 14, 2008
By DocDfrom Colorado Springs, CO
"I did a lot of looking before I purchased this nailer. I decided to get this new one because used ones were about the same price. I'm glad I did. This works well for my home addition project. I've got about 10 hours use and it's working like when I first got it."
What is your level of technical expertise?:
Home Handyman
Review 10 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
5
/ 5
awesome nail gun,
April 14, 2008
By operator3from sunny, AZ
"I like this nail gun, it is well built. but that is always the case in about 99% of all Northern brand tools. I always highly recommend them."
What is your level of technical expertise?:
Professional
Review 11 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
5
/ 5
Framing nailer,
April 14, 2008
By knybbbfrom topaz. CA
"I bought this nailer to do projects around the house, is has preformed better the expected. Used it to nail Hardy Board on my garage and workshop, and also used it to frame an extension on my workshop, worked flawlessly. Operates like a nailer at a much higher price."
What is your level of technical expertise?:
Home Handyman
Review 12 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
3
/ 5
Satisfactory,
January 26, 2008
By overdrivefrom Spartanburg, SC
"I got this nailer for the price. I like that it uses clipped head and round head nails. It depends on what you use it for. I was only able to drive about four nails, and it seemed to lock up, and shoot blanks. if I waited for about two min. it would start again no problem. I'm useing a coleman 27gal. 125 psi tank to drive it. So, if you are building small projects, it should work fine. I wouldn't recommend building a house with it though. You can't beat the price !"
What is your level of technical expertise?:
Home Handyman
1 of 1 people found this review helpful.
Review 13 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
3
/ 5
Nails & tips,
January 24, 2008
By JonHfrom Marietta, GA
"The gun performed fairly well but kept jamming when it got down to the last 3-4 nails in a sleve. I'm not sure if it was the nails or the gun but it was quite annoying to have to stop each time and spend 5 minutes clearing the jam. The rubber tip also kept sliding sideways and ended up eventually getting nailed to a board, which then had to be pulled out. Not the best in the world but certainlly not the worst."
What is your level of technical expertise?:
Home Handyman
Review 14 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
4
/ 5
Good Nailer,
January 22, 2008
By Nuccifrom Baker County, FL
"I am building a garage and needed an air nailer and didn't want to spend alot of money. I purchased this and it has worked great, excpet the fact that I bought some bad nails."
What is your level of technical expertise?:
Home Handyman
Review 15 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
5
/ 5
Can't beat it for the money,
January 21, 2008
By MVillafrom Lindstrom, MN
"I bought this framing nailer to build a utility shed for my lawn tractor and garden tools and saws. It worked flawlessly. Easy to set up. Ready to go in minutes. Or right out of the box if you are using the right nails. I could not believe the price for something that is so functional and almost necassary for a do-it-yourselfer. I highly recommend this nailer. It's a great value."
What is your level of technical expertise?:
Home Handyman
Review 16 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
4
/ 5
Framing Nailer,
January 21, 2008
By Williofrom Vermont
"Once I was able to find the right nails for this tool I found it worked well. The literature is weak on helping determine which nails will fit and function best."
What is your level of technical expertise?:
Home Handyman
Review 17 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
5
/ 5
Northern Industrial 3-in-1 Framing Nailer,
January 21, 2008
By PWTMfrom Virginia
"This product is a great time saver for the handyman. The ability to very the angle makes finding nails much easier. Weight is comparable to other makes, overall this product is great and the price is less then compareable products."
What is your level of technical expertise?:
Professional
Review 18 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
5
/ 5
Excellent nailer for the price,
January 21, 2008
By flyinmx5from Asheville, NC
"This nailer is a very good tool for the price! I have had no trouble using two of the three available nail angles with only a couple of jams per 1000 nails. This is equivalent to other very well know brand nailer I use on jobsites. This nailer could be a little heavier than professional models, but the home user would see the difference as insignificant. Overall, an awesome tool!"
What is your level of technical expertise?:
Professional
Review 19 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
5
/ 5
3-in-1 framing nailer,
January 15, 2008
By wallyofrom Hartly, Delaware
"excellant price...do not do alot of framing but this tool will fill my needs...light and easy operation"
What is your level of technical expertise?:
Home Handyman
Review 20 for Northern Industrial 3-in-1 Framing Nailer
Overall Rating:
5
/ 5
Framing Gun,
January 15, 2008
By RobCfrom Boston,MA
"This tool is so easy to use. It makes getting nails easy. If the nail supplyer is out of a the degree nail you are looking for you still have options on other degree type nails for the gun. Another good thing about this gun it is not to heavy. Cleaning is also easy."
What is your level of technical expertise?:
Professional
